background image

Not for 

Reproduction

en

37

 

BRIGGS & STRATTON PRODUCTS WARRANTY POLICY 

April 2012

LIMITED WARRANTY

Briggs & Stratton warrants that, during the warranty period specified below, it will repair or replace, free of charge, any part that is defective in material or 

workmanship or both. Transportation charges on product submitted for repair or replacement under this warranty must be borne by purchaser. This warranty 

is effective for and is subject to the time periods and conditions stated below. For warranty service, find the nearest Authorized Service Dealer in our dealer 

locator map at 

simplicitymfg.com.

 The purchaser must contact the Authorized Service Dealer, and then make the product available to the Authorized 

Service Dealer for inspection and testing.

There is no other express warranty. Implied warranties, including those of merchantability and fitness for a particular

 

purpose, are limited to 

one year from purchase, or to the extent permitted by law

All other implied warranties are excluded.

 

Liability for incidental or consequential 

damages are excluded to the extent exclusion is permitted by law. 

Some states or countries do not allow limitations on how long an implied warranty 

lasts, and some states or countries do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation and exclusion may 

not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state or country to country.

**

WARRANTY PERIOD

Applies to Briggs & Stratton engines only. Warranty coverage of non-Briggs & Stratton engines is provided by that engine manufacturer. Emissions-related 

components are covered by the Emissions Warranty Statement.

**

 In Australia - Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for 

a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the 

goods fail to be of acceptable quality and the failure does not amount to a major failure. For warranty service, find the nearest Authorized Service Dealer in our 

dealer locator map at BRIGGSandSTRATTON.com, or by calling 1300 274 447, or by emailing or writing to [email protected], Briggs & 

Stratton Australia Pty Ltd, 1 Moorebank Avenue, NSW, Australia, 2170.

The warranty period begins on the date of purchase by the first retail consumer or commercial end user, and continues for the period of time stated in the table 

above.  “Consumer use” means personal residential household use by a retail consumer. “Commercial use” means all other uses, including use for commercial, 

income producing or rental purposes. Once a product has experienced commercial use, it shall thereafter be considered as a commercial use product for 

purposes of this warranty.

No warranty registration is necessary to obtain warranty on Briggs & Stratton products. Save your proof of purchase receipt. If you do not provide 

proof of the initial purchase date at the time warranty service is requested, the manufacturing date of the product will be used to determine the 

warranty period.

ABOUT YOUR WARRANTY

We welcome warranty repair and apologize to you for being inconvenienced. Warranty service is available only through 

Simplicity

 

Authorized Service Dealers. 

Most warranty repairs are handled routinely, but sometimes requests for warranty service may not be appropriate. This warranty only covers defects in materials 

or workmanship. It does not cover damage caused by improper use or abuse, improper maintenance or repair, normal wear and tear, or stale or unapproved 

fuel.

Improper Use and Abuse 

- The proper, intended use of this product is described in the Operator’s Manual. Using the product in a way not described in the 

Operator’s Manual or using the product after it has been damaged will void your warranty. Warranty is not allowed if the serial number on the product has been 

removed or the product has been altered or modified in any way, or if the product has evidence of abuse such as impact damage, or water/chemical corrosion 

damage.

Improper Maintenance or Repair 

- This product must be maintained according to the procedures and schedules provided in the Operator’s Manual, and 

serviced or repaired using genuine Briggs & Stratton parts or equivalent.

 

Damage caused by lack of maintenance or use of non-original parts is not covered by 

warranty.

Normal Wear

 - Like all mechanical devices, your unit is subject to wear even when properly maintained. This warranty does not cover repairs when normal use 

has exhausted the life of a part or the equipment. Maintenance and wear items such as filters, belts, cutting blades, and brake pads (except engine brake pads) 

are not covered by warranty due to wear characteristics alone, unless the cause is due to defects in material or workmanship.

Stale Fuel 

- In order to function correctly, this product requires fresh fuel that conforms to the criteria specified in the Operator’s Manual. Damage caused by 

stale fuel (carburetor leaks, clogged fuel tubes, sticking valves, etc) is not covered by warranty.

Other Exclusions - 

This warranty excludes damage due to accident, abuse, modifications, alterations, improper servicing, freezing or chemical deterioration. 

Attachments or accessories that were not originally packaged with the product are also excluded. There is no warranty coverage on equipment used for primary 

power in place of utility power or on equipment used in life support applications. This warranty also excludes failures due to acts of God and other 

force majeure

 

events beyond the manufacturer’s control.

Item

Consumer Use

Commercial Use

Equipment

3 years

90 days

Engine*

3 years

90 days

Battery (if equipped)

1 year

1 year

Warranty

1737660H_EN Rev C

Summary of Contents for 2691127-0









































Reviews: