manualshive.com logo in svg

Simplicity 1693452, Operator'S Manual

The Simplicity 1693452 Operator's Manual is a comprehensive guide that equips you with all the necessary information to efficiently operate your product. This manual is available for free download at manualshive.com, ensuring easy access and quick reference whenever you need it.

Share
Download
background image

1

Table of Contents

Troubleshooting, Adjustments & Service .......26

Troubleshooting the Tractor ..................................26
Troubleshooting the Mower ..................................27
Seat Adjustment....................................................28
Steering Gear Adjustment.....................................28
Brake & Brake Spring Adj. - Hydro Models ...........28
Brake & Brake Spring Adj. - Gear Models ............29
Mower Adjustments ..............................................29

PTO Clutch Adjustment ................................29
Leveling the Mower .......................................30
Blade Brake Check .......................................31

Mower Belt Replacement ......................................32

38” Mowers ...................................................32
44” Mowers ...................................................32

Tractor Drive Belt Replacement - All Models ........33
Battery Service......................................................34

Checking the Battery Voltage ...........................34
Charging A Discharged Battery ........................34
Jump Starting with an Auxiliary Battery ............34

Transmission Purging ...........................................36

Specifications ....................................................37
Common Replacement Parts............................38

Lawn Care & Mowing Information .............LC—1
International Symbols ................................LC—8
Technical Manuals ......................................LC—8
CE Identification Tag Information ............LC—10

NOTE: In this manual, “left” and “right” are referred to as
seen from the operating position.

Identification Numbers........................................2
Safety Rules & Information.................................3
Safety Decals .......................................................5
CE Safety Icons ...................................................6
CE Compliance Specifications...........................7
Features & Controls ............................................8

Control Functions ....................................................8
Safety Interlock System Test ..................................9

Operating the Tractor ........................................10

General .................................................................10
Checks Before Starting .........................................10
Clutch/Brake Pedal Operation ..............................11
Starting the Engine ...............................................11
Stopping the Tractor & Engine ..............................11
Driving the Tractor ................................................12
Mowing..................................................................12
Pushing the Tractor by Hand ................................13
Mower Deck Removal & Installation .....................14

Removing the Mower Deck ...........................14
Installing the Mower Deck .............................15

Mower Cutting Height Adjustment ........................15
Storage .................................................................16

Regular Maintenance ........................................17

Maintenance Schedule .........................................17
Raising the Hood & Seat.......................................18
Checking/Adding Fuel ...........................................18
Checking Tire Pressures.......................................18
Check / Replace Fuel Filter...................................19
Engine Maintenance .............................................19
Blade Brake Check ...............................................19
Safety Interlock System Check .............................19
Gear Transmission Service...................................20
Hydro Transmission Service .................................20
Exhaust Screen Service........................................21
Battery Maintenance .............................................21
Lubrication ............................................................22
Lubricate Rear Axes .............................................23
Servicing the Mower Blades .................................24
Maintenance Records ...........................................25

© Copyright 2001 Simplicity Manufacturing, Inc. 
All Rights Reserved.  Printed in USA.

TP 100-2286-05-EX-SMA

WARNING

Engine exhaust from this product contains
chemicals known, in certain quantities, to cause
cancer, birth defects, or other reproductive harm.

Summary of Contents for 1693452























































Reviews:

No comments

Related manuals for 1693452

Walker MC (20 HP) Illustrated Parts Manual preview
MC (20 HP)
Brand: Walker Pages: 60
GGP ITALY SPA NM 484 Operator'S Manual preview
NM 484
Brand: GGP ITALY SPA Pages: 28
Cub Cadet 18J Operator'S Manual preview
18J
Brand: Cub Cadet Pages: 44
Texas vario 50 tr/w User Manual preview
vario 50 tr/w
Brand: Texas Pages: 60
Stiga SDNSL 108 Hydro Operator'S Manual preview
SDNSL 108 Hydro
Brand: Stiga Pages: 38
Toro 30934 Operator'S Manual preview
30934
Brand: Toro Pages: 52
Yazoo/Kees ZPKW5426 Operator'S Manual preview
ZPKW5426
Brand: Yazoo/Kees Pages: 72
Yard Machines Series 230 Operator'S Manual preview
Series 230
Brand: Yard Machines Pages: 28
Worx WG713E Manual preview
WG713E
Brand: Worx Pages: 24
McCulloch M51-190AWFP Instruction Manual preview
M51-190AWFP
Brand: McCulloch Pages: 28
Snapper 6-1238 Installation Instructions preview
6-1238
Brand: Snapper Pages: 1
Stanley 100TS Owner'S Manual preview
100TS
Brand: Stanley Pages: 26
Bad Boy CZT ELITE Series Owner'S Service Manual preview
CZT ELITE Series
Brand: Bad Boy Pages: 48
Jacobsen Zero Turn Rotary Mower Safety, Operation & Maintenance Manual preview
Zero Turn Rotary Mower
Brand: Jacobsen Pages: 62
Cub Cadet THE TANK M48 Brochure & Specs preview
THE TANK M48
Brand: Cub Cadet Pages: 4
Toyama TLM530TRMS65-XP Owner'S Manual preview
TLM530TRMS65-XP
Brand: Toyama Pages: 59
White Outdoor Cruisematic 141-846H190 Owner'S Manual preview
Cruisematic 141-846H190
Brand: White Outdoor Pages: 32
Feider Machines FTDT5175ES Original Instructions Manual preview
FTDT5175ES
Brand: Feider Machines Pages: 27

Brands by name

Popular brands

Load more brands