1. Attach hinges on Door E to Rihgt Side A
R
using Phillips Screws 4 into guide holes.
2. Attach Magnet Plates 7 to bottom corner of Door E using Phillips Screws 5 into
guide holes on Door E .
3. Attach Magnets 7 using Phillips Screws 5 into guide holes on Divider D .
4. Use Phillips screwdriver to snugly tighten screw.
5. Use Phillips screwdriver to attach Handle 8 to Door E .
NOTE:
The screwdriver is not
included in the hardware pack.
Step 14
8
E
D
7
5
7
5
A
R
A
L
Front /
Avant
Front /
Avant
Front /
Avant
4
20
Model # AXCRED15-FG
Assembly