8/16
ASSEMBLY
STEP 1
1. Insert Dowel 6 into Divider C .
2. Use rubber mallet to tap Dowels 6 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
3. Align pre-drilled holes on bottom of Back F with Dowel 6 on Divider C .
( Note: please pay close attention to the location of the 2 small guide holes which
accommodate the lid support. They need to be on the same side as the hinges .
)
4. Using 2 Allen Key Screws 3 to attach Back F to Divider C .
Small pre-drilled holes
3
Hinge
This Side
Up
6
MODEL
# AXCAB-BNCH-B