9/18
ASSEMBLY
STEP 5
STEP 6
1. Insert 2 Dowels 3 into pre-drilled holes on Large Divider C .
2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. ½ length of
Dowels should be
.
exposed
3. Attach 2 Cam Lock Pins 2 to Middle Frame E into guide holes.
4. Align and insert Cam Lock Pins on Middle Frame E into pre-drilled holes on
Large Divider C .
5. Place 2 Cam Locks 2 into pre-drilled holes on Large Divider C .
6. Use a flathead screwdriver to tighten Cam Locks into Pins.
1. Attach Small Divider D to Middle Frame E using 2 Allen Key Screws 1 .
2. Use Allen Key 4 to tighten screws. Do not over-tighten.
MODEL # 3AXCCON-04