Step 1
1. Insert Dowel 6 into Divider V16-C .
2. Use rubber mallet to tap Dowels 6 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
3. Align pre-drilled holes on bottom of Back V16-F with Dowel 6 on Divider V16-C .
( Note: please pay close attention to the location of the 2 small guide holes which
accommodate the lid support. They need to be on the same side as the hinges .
)
4. Use 2 Allen Key Screws 3 to attach Back V16-F to Divider V16-C .
Hinge
Up Side
/ Vertica
l
3
Small pre-drilled holes
5
3
6
V16-C
V16-F
10
Assembly
Model # INT-AXCACA-EB-ALB
