background image

This item is hand-crafted and hand-finished with utmost care.

As such, variations and imperfections should be expected and should be
welcomed as the natural beauty of the wood.

PLEASE NOTE:

We reserve the right to repair or replace the defec

ti

ve product, at its 

discre

ti

on.  

WARRANTY 

ailure, missing parts, etc.) 

please contact us at our toll free service line

In case of any malfunc

ti

on of your product (f

This product is guaranteed for 12 months if used for normal purposes. Any 

warranty is invalid if the product has been overloaded or subject to neglect, 

improper use or an a

tt

empted repair by other than an authorized agent. 

Heavy-duty or daily professional/commercial usage are not guaranteed.  

Due to con

ti

nuous product improvement, we reserve the right to change 

the product spec

ifi

ca

ti

ons without prior no

ti

ce.  

Thank you for purchasing 

our 

product. These products have been made 

to demanding, high-quality standards and are guaranteed for domes

ti

use against manufacturing faults for a period of 12 months from the 

date of purchase. This warranty does not a

ect your statutory rights.  

16/1

6

Summary of Contents for 3AXCCON-07

















Reviews: