background image

Product Warranty - 13

SIMPLEX, Inc., warrants the industrial electrical control, test and accessory equipment 

and parts and accessories thereof to be the kind and quality described in SIMPLEX’s 

specifications and to be free from defects in material or workmanship under normal 

service, its obligations under this warranty being limited to repairing or replacing, at its 

option, any part or parts which shall, within twelve (12) months from date of shipment 

from its factory, as indicated by serial date code on the nameplate or sales records, be 

returned to SIMPLEX or an authorized SIMPLEX repair station, with transportation 

costs prepaid, and which its examination shall disclose to its satisfaction to have been 

thus defective.
The provisions of this warranty shall not apply to any equipment, part or accessory 

which

(a)  has been improperly specified by buyer;
(b)  has been improperly stored or handled prior to placing in service;
(c)  has been improperly mounted or connected;
(d)  has not been operated within specifications stated on its nameplate, label or 

placard;

(e)  has not been properly maintained;
(f)  parts supplied by buyer for inclusion in finished equipment are not covered by 

this warranty;

(g)  components or assemblies specified by buyer with no substitution permissible 

that are not normally used by SIMPLEX.

SIMPLEX reserves the right to reject warranty claims of any kind against assembled 

equipment, parts or material for which SIMPLEX has not received payment in full. 
Should buyer, at his own risk, elect to replace defective equipment or parts in the field 

rather than return equipment to SIMPLEX’s factory or authorized repair station, SIM-

PLEX will supply and invoice parts at normal prices upon receipt of buyer’s bona-fide 

purchase order. Defective equipment or parts returned for in-warranty crediting in ex-

change for replacement parts must be returned within 45 days from date of shipment 

of replacement in order to qualify for warranty consideration. Defective equipment or 

parts returned after 45 days may be subject to a restocking charge of 20% or a mini-

mum charge of $50.00, whichever is greater.
This warranty is in lieu of all other warranties, express or implied, and all other obliga-

tions or liabilities on the part of SIMPLEX, and SIMPLEX neither assumes nor autho-

rizes any other person to assume for it any other liability in connection with any such 

electrical control, test or accessory equipment or accessories or parts.

 APPENDIx A — PRODUCT WARRANTY

Summary of Contents for FUELPORT FP-X





















Reviews: