To replace these clocks with a Simplex 2310A or 6310A clock, attach the clock mounting hanger and connector assembly
(included) to the 2310A / 6310A replacement clock according to the instructions provided. Attach the connector to the
receptacle plug and hang the clock onto the back box.
Double-Dial Mounting:
Simplex 2310A and 6310A clocks are
not
compatible with existing Simplex 2310-9810 / 2310-9812 / 2310-9814 Double-
Dial Brackets. To double-dial mount a Simplex 6310A round clocks requires either a:
SAH-4BD-12R-0
Double Mount Housing for Slim Line 12" Round Analog Clock, or
SAH-4BD-16R-0
Double Mount Housing for Slim Line 16" Round Analog Clock
To double-dial mount Simplex 2310A square clocks requires either a:
SAB-4GD-01S-0
Pole for Double/Flag Mount, 8.5 Square Analog Clock (Ceiling Mount Only), or
SAB-4GD-00S-0
Pole for Double/Flag Mount, 13.5” Square Analog Clock
New System Installation:
Simplex 2310A and 6310A synchronous clocks are ideal for installation in a new Simplex synchronous wired clock system:
1.
Back Box
Simplex 2310A / 6310A synchronous clocks may be installed using either a 2310-9011 Receptacle Assembly and
one-gang box, or a 2975-9038 or 2975-9040 Back Box. When a 2310-9011 Receptacle Assembly is utilized,
remove the terminal connector from the 2310-9011 receptacle plate and insert it into an A-RETRO-PLATE-1
Simplex Cover Plate
(ordered separately).
2.
Install Molex Connector
Connect the four-position Molex connector (included) to the clock according to the instructions provided with the
2310A/6310A clock.
3.
Clock Mount / Hanger
When mounting the clock to a 2975-9038 or 2975-9040 Back Box, attach the
Simplex clock hanger to the clock.
When mounting the clock using a 2310-9011 Receptacle Assembly and one-
gang box, the alternative locking assembly mount (included) may be used.
Install according to Simplex 2310A / 6310A installation instructions.
Simplex 2310A and 6310A synchronous clocks may also be installed in non-Simplex
synchronous clock systems:
Automatic Protocol Detection
The microprocessor-based movement of Simplex 2310A and 6310A synchronous clocks
recognizes 59-minute correction and 58-minute correction protocols, as well as National
Time, Rauland, Midnight Reset, and Dukane correction. The clock will automatically
detect and accept time correction from any of these protocols, and requires less than five
minutes to perform hand position correction.
SIMPLEX, and the product names listed in this material are marks and/or registered marks. Westminster, MA 01441 U.S.A.
Unauthorized use is strictly prohibited
Specifications sheets may change without further notice.
S6310-9300-1 5/17
