••• 4 •••
To Lower
:
Once your load has fully supported by cribbing or other means, shift over the socket plunger to the DOWN position (8). Fully insert the recommend-
ed lever bar into ratchet socket assembly (3). To operate, exert a controlled force to retract as illustrated (4) until the jack clears the load.
4.0 MAINTENANCE & LUBRICATION INSTRUCTIONS
1. Comply with the inspection, testing and maintenance requirements of ANSI B30.1 as determined from use, experience or as specified by a
qualified person of authority.
• ANSI B30.1 Safety Standards - Please visit www.ansi.org and type “jacks” in the search window.
2. Keep jack clean, free of grit, and in good working condition.
3. To lubricate internals, fill jack with lithium #1 grease through lube port (1). Lubricate ratchet assembly with good grade 20 wt. oil.
4. In addition, the operator should adhere to the general safety principles and accident preventative measures as outlined by the equipment owner
or other prevailing authority.
1
5
1
2
3
4
7
6
8
UNITED STATES HOME OFFICE
777 Oakmont Lane, Ste. 800 - Westmont, IL 60559
Phone: 1 (630) 590-6990 - Fax: 1 (630) 590-6955 - Toll Free: 1 (800) 323-9114
Email: [email protected] - www.simplexmechanicals.com
