3
The 4100-5124 Class A Adapter Card mounts to the TPS using four hex standoffs.
The standoffs have threaded male and female ends.
Follow these steps to mount the Class A Adapter Card.
1. Remove the two Torx screws shown in Figure 1. The holes in which the screws
were installed are used for the Class A board standoffs.
2. Insert the threaded male end of the hex standoff in one of the standoff holes on
the TPS. Fully screw the standoff into the threaded hole. Repeat this step for
the other three holes.
Figure 1. Location of Standoff Holes on TrueAlert Power Supply
3. Place the Class A Adapter Card on the standoffs. Align the holes on the card
with the holes on the top of the standoffs. Secure the card to the standoffs with
four screws.
White Text
Mounting to the TPS
Procedure
Remove
Screw
Remove
Screw
Screw Threaded
Male end of
Standoff into
these Holes
Screw
Threaded
Male end
of Standoff
into these
Holes
firealarmresources.com
