Simplex 4006-9101, Technical Manual

Page: 47 / 78

4-1
The panel’s DACT (Digital Alarm Communicator Transmitter) allows
the panel to use one or two telephone lines to call a supervising station
(remote station or central station) and report a local alarm, trouble, or
supervisory condition.
This chapter describes programming the DACT options to specify the
characteristics of the DACT’s phone connection, communication for-
mat, and the format of the event or CID codes used by the supervising
station.
Login at Level 4 before starting DACT programming. See Chapter 1 for
information on doing this.
Note: The <Exit/Clear> key is used to back out of menus or displays
and return to the top-level menu structure. Where possible, the <Exit/
Clear> key backs out one level at a time. There are cases, however, that
the Exit/Clear key will return the operator directly to the top-level
menu.
Accessing DACT Menu
1. Press the <MENU> key. Press <NEXT> or <PREV> until the [Pro-
gramming] option is displayed. Press <ENTER>. The following
displays:
FIRE ALARM
SUSPENDED
<ENTER> to Program
<EXIT> to resume
2. Press <ENTER>. The Programming menu appears:
<ENTER>=Accept
Prg:[Points]
3. Press <NEXT> or <PREV> until DACT is shown.
<ENTER>=Accept
Prg:[DACT]
4. Press <ENTER>. The following prompt appears.
<ENTER>=Accept
DACT: [Options]
In This Chapter
Accessing DACT Menu . . . . . . . . . . . . . . . . . 4-1
Programming DACT Options . . . . . . . . . . . . . 4-2
Programming Contact ID (CID) Points . . . . . . 4-5
Programming Event Codes . . . . . . . . . . . . . . 4-6
Saving Changes. . . . . . . . . . . . . . . . . . . . . . . 4-6
Chapter 4. Programming the DACT
Technical Manuals Online! - http://www.tech-man.com