SimpleTech STI-FAX/28.8, User Manual, Page: 38 / 90

26
Vn Result Code Format Setting. (See S14, S95, Qn, Wn, Xn.)
V0 Numeric result codes.
V1 Verbose result codes.
Wn Connection Message Setting. If you change the value of
S95, it may override the Wn setting. (See S31, Vn, Qn.)
W0 Report DTE rate only. For example:
CONNECT 57600
W1 Report DCE rate, error correction protocol, and DTE
rate. For example:
CARRIER 14400
PROTOCOL: LAPM
CONNECT 57600
W2 Report DCE rate only. For example:
CONNECT 14400
Xn Extended Result Code Setting. This command selects
which call progress result codes are reported. (See S22,
S95, Qn, Vn, Wn, and “Result Codes and Messages.”)
X0 Send basic call progress result codes: OK, CONNECT,
RING, NO CARRIER, ERROR, NO ANSWER.
X1 Same as X0 but also report rate-specific CONNECT
messages.
X2 Same as X1 but also report NO DIALTONE detec-
tion.
X3 Same as X2 but also report BUSY signal detection.
X4 Send all call progress messages.