1
3
2
4
quick start
• remove battery cover
at base of pump with
screwdriver
• insert 4 AA batteries
as shown
Use soap, lotion or
sanitizer.
Note:
Do not use
exfoliants, and be
careful not to overfill.
Place your hand under the
sensor, then immediately
press the button and hold
it until soap comes out.
Push the button. If the
blue light above the
spout doesn’t flash, try
reinstalling the batteries.
insert batteries
turn it on
fill the reservoir
prime the pump
troubleshooting tip
If soap isn’t coming out, air pressure may be
blocking the valve. Try giving the little tab under
the nozzle a gentle tug to allow air through.
Be careful:
Don’t pull out the tab!
adjust the volume
To increase the amount dispensed,
press the button. The blue light on
top of the pump will blink to show
the current setting.
Note:
To turn off, hold the button
for 3 to 4 seconds.
The blue light will flash continuously when it’s
time to replace the batteries.
Note:
The pump automatically reverts to volume
setting 4 whenever the batteries are changed.
low battery alert
setting
1
1 blink
thin soap
3
3 blinks
thick soap, lotion or sanitizer
2
2 blinks
standard soap or sanitizer
4
4 blinks
large amount of soap, lotion or sanitizer
light
recommended use
