Simpled VF-YP, User Manual, Page: 8 / 16

.: 5 :.
Overview Installation Operation FAQ Contact Us
Operation
8. Set the lock time:
1. Press the setting button nine times.
2. Verify with the admin fingerprint.
3. Press the setting button to increase the time.
No operation in 2 seconds will stop the process and keep the default locking time
setting.
The scope is 5 to 15 seconds. And the factory setting is 5 seconds.
9. Turn off/on the Bluetooth:
1. Press the setting button ten times.
2. Verify with the admin fingerprint.
3. Switch on/off the Bluetooth
Note: If you haven't registered the admin user yet, it won't ask for the admin
fingerprint (step 2 won't be required)
10. Restore to factory setting:
1. Press the setting button 11 times.
2. Verify with the admin fingerprint.
3. All data, including admin fingerprint, user fingerprint, and smart tags, will be deleted.
Note: If you haven't registered the admin user yet, it won't ask for the admin
fingerprint (step 2 won't be required)
11. Low voltage alarm:
The Simpled cylinder will automatically notify you when the voltage is lower than 3.6V.
Please change the battery as soon as you notice the alarm. Alkaline batteries are
recommended.
Tips about the Simpled cylinder operation:
Before any operation, wake up the Simpled cylinder with the button.
Unlock the Simpled cylinder with your fingerprint or tags.
Press the wake up button in 5 seconds to enter the setting menu.
Before first access registration, any fingerprint will unlock the Simpled cylinder.
But as soon as you register the first fingerprint, it will be only unlocked by
authorised users.
You can find your user ID by verifying your fingerprint or smart tags on the screen.
After each verification, the Simpled cylinder will be opened for the set time
(from 5 to 15 seconds);Then, it will be automatically disengaged again.