Simple BluStream ISBT52 Install Manual Download Page 2

Step 1.Make sure your input source on your car radio is set to AUX Input

Step 2.To answer incoming calls: Press the BluStream control button once (a)

Step 3.To end calls: Press the BluSteam control button once (a)

Step 1.Play/Pause: Press the BluStream button (a) once 

Step 2.Skip to next track: Press the BluStream button (a) twice 

Step 3.To activate Siri/Google: Press and hold the BluStream control button (a) for three seconds

WARNING:
This equipment may be reset by unintentional electrostatic discharge during operation. Exposure to direct sunlight or extreme heat may cause damage or 
malfunction. FCC Class B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This 
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful 
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause 
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:
1. Re-orientate or relocate the receiving antenna. 
2. Increase the separation between the equipment and receiver. 
3. Connect the equipment into an outlet on a circuit different from that of which the receiver is connected. 
4. Consult the dealer or an experienced radio / television technical for help.
Notice : The changes or modifications not expressly approved by the party responsible compliance could void the user authority to operate the equipment.
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1)  This device may not cause interference, and
(2)  This device must accept any interference, including interference that may cause undesired operation of the device. 

HOW TO USE

Calling Instructions

Audio Control Instructions

Got Questions? Call us! US Tel 866.788-4237 -  Outside US 1-800-477-2267

12V power source (b)

3.5mm AUX jack 

(c)

button (a)

BluStream module with control

(green button and visor clip for
professional installations only)

What’s in the box!

Visit Us: isimple.com

Optional

Reviews: