Assembly instructions for kit #16
2
This is not a Lego® product even if it contains Lego® bricks and plates. All warranties provided by Simple Motors.
LEGO® is a trademark of the LEGO Group of companies which does not sponsor, authorize or endorse this product.
All rights reserved. 2014 Simple Motors, LLC
♦
♦
2. Carefully remove the battery and wrap the ends around the coil 2-3 times to hold the coil
together with both ends extending perpendicular to the coil as shown below. The ends
should be aligned in a straight line to form a good axle. This step requires a lot of accuracy
because the balance of the coil is extremely important.
The kit contains enough wire to experiment with the coils of different size (10 and 30
windings shown).
