![Simple Motors Kit 11 Assembly Instructions Manual Download Page 7](http://html.mh-extra.com/html/simple-motors/kit-11/kit-11_assembly-instructions-manual_1276104007.webp)
Assembly instructions for kit #11
7
This is not a Lego® product even if it contains Lego® bricks and plates. All warranties provided by Simple Motors.
LEGO® is a trademark of the LEGO Group of companies which does not sponsor, authorize or endorse this product.
All rights reserved. 2013 Simple Motors, LLC
♦
www.simplemotor.com
♦
16. Fasten the reed switch to 1x2 brick with side holes using cable ties. Trim them with scissors.
17. Assemble the reed switch on the base plate. Trim the wires as necessary and remove at
least 1” (2.5 cm) of insulation.
18. Wind bare wire ends tightly around the reed switch contacts.