STYLE #:
STEP 7
A. UNFOLD DRAWERS (E).
B. INSERT DRAWER BOTTOMS (F) INTO DRAWERS
(E).
STEP 8
A. ROTATE ASSEMBLED UNIT TO THE UPRIGHT
POSITION.
B. PLACE ASSEMBLED DRAWERS (E) INTO THE
ASSEMBLED UNIT AS SHOWN.
C. PRESS CAPS (P) INTO BOLT HOLES AT SIDE
PANELS (B).
D. ASSEMBLY IS COMPLETE.
73SDRST03
ASSEMBLY INSTRUCTIONS (CONTINUED)
DRAWERS: SPOT CLEAN WITH A DAMP, CLEAN CLOTH AS NEEDED. DO NOT RUB.
DO NOT SIT, STAND, OR CLIMB ON THE STORAGE UNIT.
WHEN USING STORAGE DRAWERS, DO NOT OVEREXTEND DRAWERS AS WEIGHT COULD CAUSE TIPPING.
INTENDED FOR INDOOR USE ONLY
** WE RECOMMEND THAT YOU PERIODICALLY TIGHTEN ALL BOLTS AND SCREWS WITH PHILLIPS HEAD SCREWDRIVER,
NOT INCLUDED.
WEIGHT LIMIT
TOP: 40 LBS; DRAWERS: 10 LBS EACH
CARE AND CLEANING
FRAME: WIPE CLEAN WITH A SOFT, DRY CLOTH AS NEEDED.
Page 6/6