Simplay Labs SL-881, User Manual, Page: 20 / 55

SL-881 6G Handheld HDMI/MHL Audio and Video Generator/Analyzer
User Guide
20 © 2016-2017 Simplay Labs, LLC., Simplay-UG-02001-E
All rights reserved. CONFIDENTIAL
Licensing
If you install the SL-881 AVG software for the first time, you need to set up the connection between the SL-881 and test
computer, and then get an AVG software license.
If you already have the AVG software license, you can set up the connection between the SL-881 and test computer,
and use the AVG software directly.
3.5.1. Getting License File
You need to get and load the license file to activate the software.
If you install the AVG software for the first time, follow these steps to get an AVG software license.
1. Make sure the SL-881 is powered on and is connected to your test computer. Open the SL-881 Application shortcut
from your test computer desktop (
Figure 3.7 ). You get the main window of the AVG software ( Figure 3.8 ).
Figure 3.8. AVG Software Main Window on Test Computer
2. Select File
→
Open Device
→
Connect Device.
3. From the drop-down menu of this dialog, select the COM port shown in the Device Manager ( Figure 3.9 ).
Figure 3.9. Connect Device Dialog
4. Click Open.
5. A dialog pops up as shown in Figure 3.10 . Click OK.
Figure 3.10. No License File Found Dialog