Simpact Freeway 1100, Hardware Installation Manual, Page: 49 / 70

3: Configuring the Boot Parameters using the Initialization Disk
DC 900-1370E 49
System Boot File Name
Enter the system boot file name for this Freeway. The default is
ff f fww w w44 4 488 8 866 6 6
.
Configuration File Name
This parameter contains the file that Freeway uses to configure the
physical devices and services. Enter the file name for your Freeway. The
default file name is
bb b boo o ooo o ott t tcc c cff f fgg g g.. . .ii i iss s saa a a
for a Freeway 1100 with ICP2424
boards or
bb b boo o ooo o ott t tcc c cff f fgg g g.. . .pp p pcc c cii i i
for a Freeway 1100 or Freeway 1150 with
ICP2432 boards. For any Freeway using ICP_IP virtual ICP devices,
the default is
bb b boo o ooo o ott t tcc c cff f fgg g g.. . .ii i ipp p p.. . .
Secondary Network
Interface
If the Boot Device is a local area network device (boot server), the
Secondary Network Interface
parameter should be cleared, which is
the default.
If the Boot Device is the hard or flash disk, this parameter specifies the
local area network device to be used after Freeway boots. The values
used to define your network interface device are the same as those
defined for the Boot Device parameter on
page 47 .
Gateway Inet Interface
If your Freeway and boot server are on the same network, clear this
parameter, which is the default. If they are on different networks, enter
the IP address of the gateway processor on the Freeway’s network that
provides access to the boot server’s network.
Table 3–2: Flags for Reset Action
Flags Parameter Value Boot Protocol and Reset Action
0x0000 (default)
Upon system reset, wait 7 seconds before autobooting.
0x0004
Upon system reset, display the Freeway Boot System Main Menu.
Do not autoboot.
0x0008
Upon system reset, wait 2 seconds before autobooting.
0x1000
Display version numbers of
.mem
files downloaded to an ICP
during boot. The
Flags
word is an inclusive “
OR
” of the desired bits
for the individual functions; for example, 0x1008 waits 2 seconds
before autobooting and displays the version numbers.
Table 3–1: Freeway System Boot Parameter Descriptions (Cont’d)
Boot Parameter Description