SimonsVoss WaveNet, Manual

Page: 30 / 210

4.6 WaveNet and LSM
WaveNet and LSM are formally separate. LSM "thinks" in locking devices
and communication nodes and WaveNet manager "thinks" in LockNodes.
You create your locking system with access authorisations independently
of one another in LSM and the WaveNet Manager creates WaveNet.
WaveNet does not "know" your locking devices, only the LockNodes
connected to them. The LockNodes are physically connected to the locking
devices (Inside LockNodes) or within radio range (external LockNodes).
The LockNodes therefore "know" in which locking device they are installed.
The LSM can therefore read both information (lockig device and
LockNode) from the LockNodes via WaveNet and then establish the
logical connection between LockNode and locking device (see
Assigning
LockNodes to the locking devices [
}
66] ).
4.7 Firmware
4.7.1 Reading out firmware
You can read out the firmware versions of your devices (for information on
firmware versions see
Firmware information [
}
39] ).
RouterNodes
You can either see the firmware of the RouterNodes in the overview of the
OAM tool (for RN2, older ones only listed as "Digi Device") and update it
(see
Updating firmware [
}
32]
) or read it out with LSM (for RN and RN2).
ü
LSM is open.
ü
RouterNodes connected to LSM (for testing, see Test reachability
(LSM) [
}
177]
)
1. Via | Network | open the entry Administer WaveNet node .
9
You see a list of WaveNet-relevant components.
2. If necessary, activate the checkbox Display all WaveNet nodes.
9
You will see a list of WaveNet-relevant components.
3. Select the RouterNode whose firmware you want to read out.
4. Click the button Properties .
9
The window "WaveNet network node properties" opens.
WaveNet (Manual)
4. WaveNet system
30 / 210