5.12 CO version
In the comfort cylinder (CO), the inside knob is permanently interconnected
with the locking cam, so that doors can be opened and locked from the
inside without needing to use a transponder.
5.13 WP Version (FD)
The protection rating is increased from IP54 to IP66 in the WP version
(weatherproof) of the Locking Cylinder 3061. This version is thus suitable
for use outdoors or on external doors even if the cylinder is not exposed to
direct splash water.
Anti-panic cylinder: The WP version is specifically designed for outdoor
areas and should be fitted if the outer thumb-turn comes into contact with
water (e.g. rainwater). The WP version features greater resistance to water,
meaning the cam should not come into contact with water.
This version is available from a length of 30-35 mm and as .FD, .ZK, .MS
and .FH models.
5.14 WP version (HZ/CO/AP)
The electronic thumb-turn is sealed in the WP version of the half, comfort
and anti-panic cylinders, thus providing an increased protection rating of
IP66. This version is thus suitable when the electronics side is outdoors, i.e.
the electronic thumb-turn is exposed to rain, for example. Water must not
enter through the door.
5.15 SW version (CO)
The SW (seawater) version of the comfort cylinder has been specially
developed for use on ships or for direct use on the sea. A special, polished
V4A knob and a coated handle component are used on the outside.
5.16 VR version (HZ)
This version features a shortened operating range. It is suitable for use in
items such as locker doors and mail box systems when the distance to the
next door is less than 40 cm.
5.17 DK version (HZ)
The knob can be detached and is ideal for installation behind cover plates
on key switches, for example.
Digital Locking Cylinder 3061
(Manual)
5. Versions
22 / 54
