You can enter the type of card reader here which the SmartRelay is to
simulate for operation as a serial interface.
The following options are available:
Wiegand, 33 bit
Wiegand, 26 bit
Primion
Siemens
Kaba Benzing
Gantner Legic
Isgus
External LED/external beeper
For SREL.ADV only: This indicates which external component group is
connected. In flip-flop mode, SmartRelay emits a permanent signal
when switched on if there is an external LED; if there is a beeper, an
audible signal is only emitted when there is a change of status.
Invert outputs
You can use these settings to invert the relay output.
6.2 MobileKey
A (MK) SmartRelay can be quickly configured in the MobileKey web app.
As a general rule, distinction is only made between an opening interval and
a permanent opening (flip-flop). A LockNode can be configured as an
option to connect the SmartRelay via a SmartBridge.
SREL1+2
(Manual)
6. Configurations in the software
29 / 38
