Simons Voss Technologies SmartHandle AX Manual Download Page 109

Page: 109 / 178

2. Insert the dummy cylinder.

3. Tighten the handle (T15, torque: 5.0 Nm).

4. Screw the dummy cylinder tight (PH2, torque: 1.1 Nm).

SmartHandle AX mounting is complete.

Mounting the panic bar

NOTE

Third party product with own documentation

The panic bar holder is a third-party product.



Please follow the manufacturer's instructions and safety instructions.

6.5.6 Information for panic bar

The adapter plate for the fitting is pre-bent. The pretensioning ensures the
frictional connection to the door after installation.

The scope of delivery includes a spare screw. You can use this screw if you
have lost a screw for mounting the adapter plate.

6.6 Variants E0 and E1 (Scandinavian Oval)

The assembly of the variants E0 and E1 is very similar. Variant E1 differs
from variant E0 by the break-out for the locking cylinder.

SmartHandle AX

(Manual)

6. Installation

109 / 178

Summary of Contents for SmartHandle AX



















































































































































































Search results

Summary of Contents for SmartHandle AX

Reviews:

Related manuals for SmartHandle AX

Brands by name

Popular brands

Simons Voss Technologies SmartHandle AX, Manual

Search results

Summary of Contents for SmartHandle AX

Reviews:

Related manuals for SmartHandle AX

Brands by name

Popular brands