12
Operating Instructions
6. o
peratIng
I
nstructIons
6.1 Working with the Foam Blaster
Working with a detergent ensures quick soaking of the dirt, and
allows the high-pressure water to penetrate and remove the dirt
more effectively. Always spray detergent on a dry surface, do not
pre-soak the area. Wetting the surface first dilutes the detergent
and reduces its cleaning ability.
a
Engage the safety lock on the spray gun.
s
1
2
3
1. Rotate the foam blaster’s spray head from vertical position
to horizontal position.
2. Detach spray head by turning detergent bottle 1/4 turn
counterclockwise.
3. Fill the bottle with the detergent.
4. Reattach the spray head on to the bottle by turning 1/4
turn clockwise.
d
1. Attach the foam blaster (H) onto the spray gun (D).
2. Apply the detergent to a dry work surface from bottom
to top.
3. Allow detergent to remain on the surface for a short
time before rinsing. Do not allow detergent to dry on the
surface.
4. When you are finish working with detergent, fill with
clean water in bottle and spray water for one minute in
ON
position.
CAUTION
Damage may occur to painted surfaces if chemicals are
allowed to dry on them. Wash and rinse a small section at
a time.
S2000-Washer-EN-01.indd 12
2015-01-13 3:10 PM
