Maximum Pressure
3000 PSI
Rated Water Pressure
2200 PSI
Maximum Water Flow
9 litres per minute
LPM (2.1 gallons
per minute GPM)
Minimum Inlet Pressure
30 PSI
Maximum Inlet Pressure
100 PSI
Pump Type
Heavy-duty main-
tenance free axial
cam
Thermal Relief Valve
Included
Detergent Tank (Vo-
lume)
1.2 L each (0.32
Gal)
Maximum Temperature
of Pumped Water
40
℃
(104
℃
)
Engine Power (OHV)
7.0 HP
No Load Speed
3600 RPM
High Pressure Hose
Length
9 m (30')
Inlet & Discharge Ports
13 mm (3/4")
standard garden
hose connector
Displacement
212 (cc)
Net Weight
37kg (81.6 lbs)
Oil Type
SAE 10W30
Oil Capacity
0.6 L
Fuel Type
Unleaded Gasoline
Fuel Tank
3.6 L
Cleaning and Maintenance/Technical Specifications
Cleaning and Maintenance/Technical Specifications
21
21
7. C
LEANING AND
M
AINTENANCE
7. C
LEANING AND
M
AINTENANCE
• Make sure the engine
I/O
switch (12) is set to
O
position. Slowly pull the starter cord handle
(13) until you feel tension, which indicates the
piston is on its compression stroke and leave it
in this position.
• Replace the spark plug.
• Make sure the engine
I/O
switch (12) is set to
O
position. Slowly pull the starter cord handle
(13) until you feel tension, which indicates the
piston is on its compression stroke and leave it
in this position.
• Replace the spark plug.
7.5 Winterizing Procedures
7.5 Winterizing Procedures
• Pressure washer might be damaged if sub-
jected to freezing temperatures. This type of
damage is not covered by the limited warranty.
To avoid possible damages, use a small
amount of antifreeze.
• Place the pressure washer on its side, with
the water inlet (17) facing upwards, and pour
1/4 cup of antifreeze into the water inlet (17).
• Make sure the engine
I/O
switch (12) is set to
O
position and pull the starter cord handle (13)
several times to distribute the antifreeze inside
the pump system.
• When taking the pressure washer out of sto-
rage, run water through the system until it runs
clear.
• Pressure washer might be damaged if sub-
jected to freezing temperatures. This type of
damage is not covered by the limited warranty.
To avoid possible damages, use a small
amount of antifreeze.
IMPORTANT
• If the pressure washer is to be stored with gasoline
in the fuel tank and carburetor, it is important to re-
duce the hazard of gasoline vapor ignition.
• Select a well-ventilated storage area away from any
appliance that operates with a flame, such as a
furnace, water heater, or clothes dryer. Also avoid
any area with a spark-producing electric motor, or
where power tools are operated.
• If possible, avoid storage areas with high humidity,
because that promotes rust and corrosion.
• Place the pressure washer on a level surface. Tilting
can cause fuel or oil leakage.
• Do not use plastic sheets as a dust cover. A non-
porous cover will trap moisture around the pressure
washer, promoting rust and corrosion.
IMPORTANT
• If the pressure washer is to be stored with gasoline
in the fuel tank and carburetor, it is important to re-
duce the hazard of gasoline vapor ignition.
• Select a well-ventilated storage area away from any
appliance that operates with a flame, such as a
furnace, water heater, or clothes dryer. Also avoid
any area with a spark-producing electric motor, or
where power tools are operated.
• If possible, avoid storage areas with high humidity,
because that promotes rust and corrosion.
• Place the pressure washer on a level surface. Tilting
can cause fuel or oil leakage.
• Do not use plastic sheets as a dust cover. A non-
porous cover will trap moisture around the pressure
washer, promoting rust and corrosion.
8. T
ECHNICAL
S
PECIFICATIONS
8. T
ECHNICAL
S
PECIFICATIONS
