5
IV. Guarantee conditions
The warranty covers material and function defects. Excepted are hose, plastic rollers and the hose
stoppen The manufacturer is not liable for damages caused by improper operation and Installation
by the user. Arbitrary opening and possible removal and replacement of the hose also cancels the
guarantee.
V. Assembly advices before initiation
1. Installation should be done only by a trained technician. Be sure the tension and fastening are
correct.
2. Mount hose winder bracket with screws to a sufficiently stable wall or ceiling. The hose runout
should be on top.
3. Once the winder has been sufficiently fastened you can connect the inlet and the desired tool.
4. Check the seals, the rotating coupling and the hose for leaks.
5. Make sure that the rotating coupling can turn freely with the winder.
6. Expect pressure loss when connecting couplings and changeable plugs that have different flow
sizes.
VI. Operation
1.
Unwinding: Pull hose slowly to the desire length. „Clicks" indicate the catch locations. Pull out
maximum to the marking.
2. Winding up: Pull hose slowly and hold the end. Catch is released. Allow hose to wind up under
guidance.
VII. Maintenance and inspection
-
