digital drum assembly instructions
SD7K
Cymbal Holder (L)
Cymbal Holder (S)
2. Attaching the drum pads
3. Attaching the cymbal pads
Wing Nut
Drum Pad Assembly
Holder Clamp
Holder Clamp
Holder Clamp
Holder Clamp
Wing Nut
Felt Washer
2
1
3
4
1 2
1 2
1 2
4 5
Wing Nut
Felt Washer
5
5
3
5
5
Loosen the Wing Nuts on the drum pads.
Remove the Metal Rods.
Re-attach the Metal Rods to the drum pads.
Tighten the Wing Nuts.
Attach the drum pads assemblies to the holder clamps
and adjust their position, then tighten the wing nuts on
the Holder clamps.
Repeat for other pads.
1
5
4
3
2
Attach the Cymbal Holders to the Cymbal
Holder clamps on the Side Arms.
Tighten the Wing Nuts on the Holder clamps.
Remove the Wing Nut and the Felt Washer
of each Cymbal Holder.
Attach the Cymbal pads to the Cymbal Holders.
Re-attach the Felt Washer and Wing Nut, then tighten
the Wing Nut of each Cymbal Holder.
Repeat for other cymbals.
1
5
4
3
2
