SD5K
www.simmonsdrums.net
saving drum kit voices
parameters
pad sensitivity
11
Make sure you save your customized kit; otherwise, your drum kit
will be erased when you turn off the unit or change kit selection.
1.
Press
[save]
button. Kit number 023 will flash.
2.
Press
[+]
or
[ - ]
buttons to set the kit number (023-032)
for saving your drum kit.
3.
Press
[save]
button again.
Note:
To cancel the save operation, press the
[voice]
button.
You can adjust the sensitivity (gain) of the inputs from pads.
1.
Hold down
[kit/reverb]
and press
[voice / volume]
buttons. Display
shows: “EXX”, the pad sensitivity value is indicated. (XX=gain level value,
00 to 15)
2.
Press
[pad]
button or hit the pad you want to set.
The pad indicator will light up.
3.
Press
[+]
or
[ - ]
buttons to adjust the sensitivity of pads.
(Range: 00 -15) Large values will produce high sensitivity even if the
pad is hit softly. Lower values will produce low sensitivity even if
the pad is hit forcefully.
4.
Repeat steps 2 and 3 to set the voice for another pad.
Note:
1.
After adjusting the sensitivity value, you can save them into
memory. In the sensitivity mode, press the
[save]
button.
You will then be returned to the previous display.
2.
If the drum remains untouched for 10 seconds, the LED will return
to the previous display.
3.
If you turn off the power without saving, you will lose the changes
you have just made.
4.
This parameter affects all kits.
