Simmons DA50B, Owner'S Manual

Page: 6 / 8

6
Output Power
50 W /8 ohm . . . . . . . . . . . . . . . . . . . . . . . . . . . . Output to speakers
500mW / 32 ohm . . . . . . . . . . . . . . . . . . . . . Output to headphones
Frequency Response
20 -20kHz . . . . . . . . . . . . . . Actual response is tailored for accurate
acoustic reproduction of individual sounds
Total Harmonic Distortion
2% . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . At full output
0.1% . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Nominal
Hum and Noise
-60 dBV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .All controls down
-55 dBV . . . . . . . . . . . . . . . . . . . . . . . . . . . . All controls at 12 o’clock
Input Impedance
10K ohms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . All Inputs
Input Impedance Input Levels
(All measurements made at 1 kHz, EQ controls flat and volumes Max.)
-10 dBV . . . . . . . . . . . . . . . . . . DRUM INPUTS to achieve full output
-10 dBV . . . . . . . . . . . . . . . . . . . . . . . INPUT 2 to achieve full output
0 dBV . . . . . . . . . . . . . . . . . . . . . . . .LINE IN to achieve full output
Tone Controls (EQ Centers)
60Hz, 800 Hz, 10kHz . . . . . . . . . . . . . . . . . . . . . . . . 3-band, ±12 dBV
SPECIFICATIONS
SIGNAL FLOW DIAGRAM
Dimensions English
15.5” Deep, 15.5” Wide,
16” Tall (including feet)
Dimensions Metric
39.37cm Deep, 39.37cm Wide,
40.64cm Tall (including feet)
Weight - Lbs/Metric
33 lbs/ 15 Kg
Speakers 1 x 10” (250mm) Woofer,
1 x 2” (51mm) Tweeter
AC Power Requirements
80W . . . . . . . . . . . . . . . . . . . . . . . . . At full output
7W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . At idle