background image

14

IMPORTANT SAFETY INSTRUCTIONS

Please keep this instruction manual for future reference and for the 
duration of owning your Simmons DA2100 Series Advanced Electronic 
Drum Amplifier. Please carefully read and understand the instructions 
inside this owner’s manual before attempting to operate your new 
amplifier.

This instruction manual includes essential safety information regarding 
the use and maintenance of the amplifier. Take special care to heed all 
warning symbols and signs inside this manual and those printed on the 
amplifier panel on the back of the unit.

WARNING
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE 
AMPLIFIER TO WATER/MOISTURE, NOR SHOULD YOU OPERATE THE 
AMPLIFIER NEAR ANY WATER SOURCE.

The exclamation point triangular symbol is intended to alert the user 
to the presence of important operating and maintenance(servicing) 
instructions in the user manual accompanying the Amplifier.

The lightning flash with an arrow triangular symbol is intended to alert 
the user to the presence of non-insulated “dangerous voltage” within the 
product’s enclosure, and may be of sufficient magnitude to constitute a 
risk of electric shock.

WARNING
Handle the power supply cord with care.
Do not damage or deform it as it may cause electric shock or malfunction 
when used. Hold the plug attachment when removing from wall outlet. 
Do not pull on the power cord.

IMPORTANT SAFETY PRECAUTIONS
1.  Read these instructions.

2.   Keep these instructions.

3.   Heed all warnings.

4.   Follow all Instructions.

5.   Do not use this apparatus near water.

6.   Clean only with dry cloth.

7.  Do not block any ventilation openings. Install in accordance with the 

manufacturer’s instructions. DO NOT turn on the amplifier module 
before connecting all other external devices.

8.  Do not install near any heat sources such as radiators, heat registers, 

stoves, or other apparatus (including amplifiers) that produce heat.

9.   Do not defeat the safety purpose of the polarized or grounding-type 

plug. A polarized plug has two blades with one wider than the other. 
A grounding type plug has two blades and a third grounding prong. 
The wide blade or the third prong is provided for your safety. If the 
provided plug does not fit into your outlet, consult an electrician for 
replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly 

at plugs, convenience receptacles, and the point where they exit 
from the apparatus.

11. Only use attachment/accessories specified by the manufacturer.

12. Use only the cart, stand, tripod, bracket or table specified 

by the manufacturer, or sold with the apparatus. When 
a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for 

long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required 

when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects 
have fallen into the apparatus, the apparatus has been exposed to 
rain or moisture, does not operate normally, or has been dropped.

15. POWER SOURCES – This product should be operated only from the 

type of power source indicated on the rating label. If you are not 
sure of the type of power supply to your home, consult your product 
dealer or local power company.

16.   WALL OR CEILING MOUNTING – The product should never be 

mounted to a wall or ceiling.

17. Where the mains plug or an appliance coupler is used as the disconnect 

device, the disconnect device shall remain readily operable. 

18. OBJECT AND LIQUID ENTRY – Care should be taken so that objects 

do not fall and liquids are not spilled into the enclosure through 
openings.

19. Water and Moisture: This product should be kept away from direct 

contact with liquids. The apparatus shall not be exposed to dripping 
or splashing and that no objects filled with liquids, such as vases, shall 
be placed on the apparatus.

20.  Keep the product out of extended or intense direct sun light.

21. No containers filled with any type of liquid should be placed on or 

near the product.

22.  SERVICING – The user should not attempt any service to the speaker 

and/or amplifier beyond that described in the operating instructions. 
All other servicing should be referred to qualified service personnel.

23. VENTILATION – Slots and openings in the amplifier are provided for 

ventilation and to ensure reliable operation of the product and to 
protect it from overheating. These openings must not be blocked 
or covered. The openings should never be blocked by placing the 
product on a bed, sofa, rug, or other similar surface. This product 
should not be placed in a built-in installation such as a bookcase or 
rack.

24.  Protective earthing terminal: The apparatus should be 

connected to a main socket outlet with a protective 
earthing connection.

25.  ACCESSORIES – Do not place this product on an unstable 

cart, stand, tripod, bracket, or table. The product may fall, causing 
serious injury to a child or adult, and serious damage to the product. 
Use only with a cart, stand, tripod, bracket, or table recommended 
by the manufacturer, or sold with the product.

26. When moving or not using the appliance, secure the power cord 

(e.g., wrap it with a cable tie). Be careful not to damage the power 
cord. Before using it again, make sure the power cord has not been 
damaged. If the power cord has been damaged at all, bring the unit 
and cord to a qualified service technician for repair or replacement as 
specified by the manufacturer.

27.  LIGHTNING – For added protection during a lightning storm, or when 

it is left unattended and unused for long periods of time, unplug it 
from the wall outlet. This will prevent damage to the product due to 
lightning and power-line surges.

28. REPLACEMENT PARTS – When replacement parts are required, be 

sure the service technician has used replacement parts specified by 
the manufacturer or parts that have the same characteristics as the 
original parts. Unauthorized substitutions may result in fire, electric 
shock, or other hazards.

CAUTION: TO REDUCE THE RISK OF ELECTRIC 

SHOCK DO NOT REMOVE COVER (OR BACK) NO 

USER-SERVICEABLE PARTS INSIDE REFER 

SERVICING TO QUALIFIED PERSONAL

Summary of Contents for DA2100 Series














Reviews: