DA200S
www.simmonsdrums.net
specifications
Model
DA200S
Electronic Drum Amp
Output Power (RMS 1% )
50 Watts @ 8 Ohms (x2)
Tweeter Internal Speakers (Stereo)
50 Watts @ 4 Ohms (x2)
Midrange Internal Speakers (Stereo)
100 Watts @ 8 Ohms (x1)
Subwoofer Internal Speaker (Mono)
500 mWatts @ 32 Ohms (x2)
Output to Headphones (Stereo)
Frequency Response
20 Hz - 20 kHz
Tailored for accurate acoustic response
for electronic drums
Hum and Noise
-60 dBV
All controls turned down
-55 dBV
All controls turned halfway
Input Impedance
10K Ohms
All Inputs
Input Levels
-16 dBV
Drum Inputs to achieve full output
- 20 dBV
Aux to achieve full output
-10 dBV
Line In to achieve full output
External Outputs
Max External Speaker Output: 30 Watts (x2)
Extension Speaker Jacks are wired in series
with internal midrange speakers.
XLR Balanced Line Outputs
Adjustable from off (CCW) to 0 dBV (CW).
Wiring follows IEC268 standard (pin1 shield,
2 +, and 3 –).
Tone controls (EQ Centers)
50 Hz, 800 Hz, 10 kHz
3 band, +/–12 dB
AC Power Requirements
400 Watts
At full output
14 Watts
At idle
Speakers
12” (305 mm) Woofer
Special design, 8 Ohms rated 150 Watts RMS
2 x 6.5” (165 mm) Midrange
Special design, 4 Ohms rated 65 Watts RMS
2 x 2.5“ (64 mm) Tweeter
Special design, 8 Ohms bullet horn rated 50 Watts RMS
Dimensions (English)
16 1/2” Deep, 17 3/4” Wide, 20” Tall
(including feet)
Dimensions (Metric)
420 cm Deep, 450 cm Wide, 508 cm Tall
(including feet)
Weight
57 lbs./25.8 Kg.
(All measurements made at 1 kHz,
EQ controls flat and volumes Max.)
7
