4
Assembly
6
7
8
Attaching Canopy
• Locate the canopy and align the canopy holes on the canopy
fixture with the fixing rivets on the handles.
• Press down the canopy until it “clicks” into the locked position.
• Check to make sure the canopy is properly attached.
Attaching Bumper Bar
• Locate the bumper bar and align the bumper bar pegs with
holes in front of the seat unit.
• Insert the bumper bar until you hear it “click” into the locked
position. Pull out on the bumper bar to make sure its securely
attached.
5
5
Attaching Rear Wheels
• Locate the rear leg on the back of the stroller and the rear
wheel, align the rear wheel with the rear leg as pictured above.
• Remove the cotter pin and washer, then slide the wheel onto
axle with the wheel hub facing the stroller, Slide on the washer,
insert straight side of cotter pin through the hole in the axle.
• Then snap on the rear wheel cover until you hear a “click”.
• Pull on the rear wheel assembly to make sure it is securely
attached to the rear leg.
• Repeat this procedure to attach the other rear wheel assembly.
Wheel Cover
Cotter Pin
Washer
Rear Wheel
Wheel Hub
Rear Leg
• Locate the zipper on the rear edge of the canopy and the top of
the seat.
• Zipper the canopy closed.
Customer Service
Tel. 1-(800)-218-2741
www.SimmonsKidsProducts.com
Assembly Air Filled Tire (On Some Model)
Attaching Air Filled Rear Wheels (On Some Model)
• Locate the air tire.
• Insert the tire attachment arm into the hole insert on the frame
attachment housing.
• Push the tire into the attachment housing until you hear it
“click” into the locked position.
• To remove the air tire, press the lock button on the frame
attachment housing and pull out the wheel.
Rear Wheel Frame
Lock Botton
Air Filled Tire
Tire Attachment Arm
