Simmob Nivo 12.064.364 Manual Download Page 3

ATTENTION : THE FAILURE TO RESPECT OR THE NOT OBSERVATION OF ASSEMBLING

INSTRUCTIONS, SAFETY AND FUNCTIONING AND RELATIVE WARNINGS HAS THE USE

OF THIS PRODUCT CAN PULL SEVERE PHYSICAL INJURY.

We hereby declare, under our full responsibility, that the following products :
Bureaux assis/debout model SQ145 200
Comply with Directive 2006/42/EF of European Parliament and 2006 May 17th Council on machines and to changes in Directive 95/16/EF
Given the above, please note that :
- Bureau assis/debout is considered as a machine
- Bureau assis/debout must not be used before being assembled and installed according to instructions

7.  

DECLARATION OF CONFORMITY

Maximum support load (on the base frame) 80  Kg
Maximum point load  100 Kg

6. 

TECHNICAL DATA

- The base frame will not require any specific maintenance if it is used as described in chapter 2.
- The base frame must be mantained using a damp cloth
- In case of vibrations during operation, STOP USING the desk and contact the seller.  

5. 

MAINTENANCE AND FAILURE

4.  

FUNCTIONING

Once assembled, the base frame is adjusted in a way the desk will be levelled and will not be moved anymore. Then you can plug the desk in to a 100-240 VAC
plug. The base frame is ready for use.
- Check that the cables are not stuck or cut
- Place the desk reasonably far from any window frames, heaters, pieces of furniture…, so the users do not get stuck
- Do not place any object higher than 55cm/21ʺ under the desk
- You always have to dismantle the top before moving the desk. Under no circumstances shall the desk be lifted up with the top. You have to take the base
 frame down to its minimum height before you move it.

3.  

 ASSEMBLY AND INSTALLATION

Height adjustable desks, equipped with electric motor, are exclusively intended for work places situated in a dry environment  (0-40°C, humidity level between
20 and 90%). The desk height is continuously adjustable so you can set it up to the most suitable and ergonomic working height. 
They are not intended to any other use than the ones described in these instructions. For instance, they must not be used in high humidity level or high da
pness level environments, nor to lift anyone up.  Any other use will be at your own risk. 

Do not kneel or lie down or move under the desk, do not sit or stand on the frame

Children can use the electric base frame only under adults supervision 

Responsibility : The builder will not accept any warranty claim nor be held responsible for any damage caused by an inappropriate use of the frame or by

handling it a different way than the one described in these users instructions. 

2.  

USE

The base frame matches every prescribed security rules. 
An inapproriate use may result in potential risks for users or may damage the frame.
Please read safety instructions before use. It will provide you with significant information about security, use and maintenance of the frame, in order to
protect you and your family as well as to prevent from damaging the frame. 
Please keep these users instructions and please forward them to its next owner !

1.  

SAFETY AND CAUTION

Up/Down settings :
Press the buttons to lift up / take down the desk

3/7

EN:

Summary of Contents for Nivo 12.064.364








Reviews: