12
2.2. Brake & Clutch
To get stiffer pedal you can:
●
Adjust the pushrod top connection to a higher position
●
Use the included spring (brake has optional spring)
●
Add preload by adding washers on the rod assembly (see below pictures)
To get softer pedal you can:
●
Adjust the pushrod top connection to a lower position
●
Use the included elastomer (only brake)
●
remove preload by removing washers from the rod assembly (see below pictures)
If the spherical rod-end is not moving easily, lift up the rear of the spring / elastomer assembly and then adjust while there is no
compression.
Summary of Contents for THERA PEDALS
Page 1: ...Manual v 1 4...
