11
Carbon Filter Assembly
Open the product cover and take out the aluminum filter. (see figure 3) Turn the
carbon filter in the direction of the arrow by pressing the sides. (see Fig. 4)
Figure 2
Figure 3
Figure 4
Flap Assembly
Attach flap tabs to points A as shown in Figure 5. Complete the assembly
process so that the nails remain on the upper surface as shown in Figure 6.
Adapter Mounting
Motor outlet diameter is 150 mm. If a connection with a 120 mm spiral hose
be required, the plastic adapter must be mounted on the body as shown in the
figure.
Carbon
filter
Flap
plastic
A
A
Figure 5
Figure 6
Figure 7
150 / 120mm
adapte
r Body
Figure 8
