Simfer MD 2310, User Manual

Page: 29 / 74

Shut off oven power if the door is opened during operation.
a- Hub (underside)
b- Glass tray
c- Turntable shaft
d- Turntable ring assembly
Remove all packing material and accessories. Examine the oven for
any damage such as dents or broken door. Do not install if oven is
damaged. Cabinet: Remove any protective film found on the microwave
oven cabinet surface. Do not remove the light brown Mica cover that is
attached to the oven cavity to protect the magnetron.
Installation Instructions
Electrical connection
The oven is fitted with a plug and must only be connected to a properly
installed earthed socket. The socket must only be installed and the
connecting cable must only be replaced by a qualified electrician, and
in accordance with the appropriate regulations. If the plug is no longer
accessible following installation, an all-pole isolating switch must be
present on the installation side with a contact gap of at least 3 mm.
The fitted cabinet must not have a back wall behinf the appliance.
A. Built-in furniture
GB
7
Never place the glass tray upside down.
The glass tray should never be
restricted.Both glass tray and turntable
ring assembly must always be used
during cooking. All food and containers of
food are always placed on the glass tray
for cooking. If glass tray or turntable ring
assembly cracks or breaks, contact your
nearest authorized service center.
a
b
c
d
The built-in cabinet shall not have a rear wall behind the appliance.
Minimum installation height is 85cm.
Do not cover ventilation slots and air intake points.
Do not trap or bend the power cable.