Simfer 7631 S, Service Manual

Page: 19 / 66

Installation of the Hanger Plate to the Hood
Secure 2 (two) hanger plates provided with the installation accessories
to the hood with 1 tightening nut screw as shown in Figure 1. Ensure
that the hanger plates are secured in their seats.
Installation of the Hanger Plate to the Wall
Drive 8 mm dowels to the holes (A, B, C) drilled as per the installation
template. Secure the hanger plate to the wall using 2 chipboard screws
as shown in Figure 2.
Figure 2
Figure 1 Installation Template
Installation of the Inner Flue Hanger Plate
Drill 2 securing holes on the wall at a suitable height and at required locations
using a Ø6mm drill to secure the inner flue hanger plate. Drive 6 mm dowels to
these holes and secure the inner flue hanger plate. At the end of the installation
of the hood, screw the inner flue to the hanger plate from the corresponding
points.
Hanging the Hood to the Wall
Raise the hood holding its body and connect hanging plates to the dowels on
the wall as shown in Figure 3.
Figure 3 Figure 4