User manual for Digital Indicator and cooperating software
•
Start editing the character for the selected position
•
Confirm the changes and finish parameter editing (when option "
Save
" is
distinguished with brackets and flashes).
•
Cancel changes (at any time).
Fig. 7.7. Character editing
Functions of keys when editing selected character
(at this time characters table is displayed below the edited parameter):
•
Selecting the character from the given line of characters table for the edited
position of the text parameter.
•
Selecting the character from the given column of characters table for the
edited position of the text parameter.
•
Confirm the selected character from characters table for the edited position
and start editing next character or completing character editing (if the edited
character was the last one in the sequence).
•
Cancel changes (at any time).
7.1.3.
“SLIDER” - type parameters
The parameters of this type are presented graphically in the form of a bar that turns black
correspondingly to the ratio of the current value of the selected parameter to the maximum
value of this parameter. Entering the new parameter value (Fig. 7.8) consists of changing the
level of "blackening" the bar within the allowable range using the
[<]
,
[>]
keys.
Fig. 7.8. Editing "SLIDER" - type parameter
26
ENTER
MENU
ESC
ENTER
MENU
ESC
edited position is outlined
and blinking
selected charakter is outlined
SLIDER-type parameter
edited parameter is outlined
and blinking
