User manual for - INDICATOR SWE-73-T
Accepted prolonged input overload: 20%
Communication interface
RS 485, 8N1 and 8N2, Modbus RTU,
not separated
Baud rate
1200 bit/s ÷ 115200 bit/s
Display
LED, 4 digit, 13mm height, red
Data memory
non-volatile memory, EEPROM type
Protection level
IP 65 (from front - option, IP 40 - standard)
IP 20 (housing and connection clips)
Housing type
Housing material
Housing dimensions
panel
NORYL UL94V-0
for 24V DC version: 72 x 36 x 77 mm
for 230V AC version: 72 x 36 x 94 mm
Mounting hole
Assembly depth
67 x 32,5 mm
for 24V DC version: min. 78 mm
for 230V AC version: min. 95 mm
Panel thickness
max. 5 mm
Operating temperature
(depending on version)
0°C to +50°C
or -20°C to +50°C
Storage temperature
(depending on version)
-10°C to +70°C
or -20°C to +70°C
Humidity
Altitude
5 to 90% no condensation
up to 2000 meters above sea level
Screws tightening max. torque
0,5 Nm
Max. connection leads diameter
2,5 mm
2
Safety requirements
according to: PN-EN 61010-1
installation category: II
pollution degree: 2
voltage in relation to ground: 300V AC
insulation resistance
: >20M
W
insulation strength between power supply and
input/output terminal: 1min. @ 2300V
EMC
according to: PN-EN 61326-1
This equipment is not intended for use in residential environments and may
not provide adequate protection to radio reception in such environments.
4.
DEVICE INSTALLATION
The unit has been designed and manufactured in a way assuring a high level of user
safety and resistance to interference occurring in a typical industrial environment. In order to
take full advantage of these characteristics installation of the unit must be conducted correctly
and according to the local regulations.
5
!
