Simex SUR-94, User Manual

Page: 50 / 60

User manual - METER SUR-94
Register Write Range Register description
56h Yes 0 ÷ 1
“ H r3 ” parameter in “ HOLd ” menu:
0 - “ rEAL ” mode ; 1 - “ HOLd ” mode
57h Yes 0 ÷ 1
“ H r4 ” parameter in “ HOLd ” menu:
0 - “ rEAL ” mode ; 1 - “ HOLd ” mode
58h Yes 0 ÷ 1
“ HOUt ” parameter in “ HOLd ” menu:
0 - “ rEAL ” mode ; 1 - “ HOLd ” mode
70h 5 Yes -999 ÷ 1999
The value of „ X ” coordinate of point no. 1 of the user defined
characteristic, expressed in 0.1%
71h 5 Yes -999 ÷ 9999
The value of „ Y ” coordinate of point no. 1 of the user defined
characteristic, no decimal point included
72h 5 ÷ 95h 5
Further pairs of „ X ” - „ Y ” coordinates of points no. 2 ÷ 19 of the
user defined characteristic
96h
5
Yes -999 ÷ 1999
The value of „ X ” coordinate of point no. 20 of the user defined
characteristic, expressed in 0.1%
97h 5 Yes -999 ÷ 9999
The value of „ Y ” coordinate of point no. 20 of the user defined
characteristic, no decimal point included
A0h 1
Yes 0 ÷ 3
“ Omod ” parameter in “ OUtP ” menu (active current output mode)
0 - current output disabled ; 1 - current output enabled with 4 ÷ 20mA
mode; 2 - current output enabled with 0÷20mA mode ;
3 - current output controlled via RS-485 interface
Yes 0 ÷ 2
“ Omod ” parameter in “ OUtP ” menu (passive current output mode)
0 - current output disabled ; 1 - current output enabled with 4 ÷ 20mA
mode; 2 - current output controlled via RS-485 interface
Yes 0 ÷ 5
“ Omod ” parameter in “ OUtP ” menu (active voltege output mode)
0
- voltage output disabled ;
1
- voltage output enabled with
0 ÷5V
mode;
2
- voltage output enabled with
1÷5V
mode ;
3
- voltage
output enabled with
0÷10V
mode ;
4
- voltage output enabled with
2÷10V
mode ;
5
- voltage output controlled via RS-485 interface
A1h 1 Yes -999 ÷ 9999 “ OUtL ” parameter in “ OUtP ” menu, no decimal point included
A2h 1 Yes -999 ÷ 9999 “ OUtH ” parameter in “ OUtP ” menu, no decimal point included
A3h 1
Yes 0 ÷ 999
“
Lo r
” parameter in “
OUtP
” menu, for active current output and
active voltage output, expressed in 0.1%
Yes 0 ÷ 299
“ Lo r ” parameter in “ OUtP ” menu for passive current output,
expressed in 0.1%
A4h 1
Yes 0 ÷ 199
“ Hi r ” parameter in “ OUtP ” menu for active and passive current
output, expressed in 0.1%
Yes 0 ÷ 99
“ Hi r ” parameter in “ OUtP ” menu for active voltage output,
expressed in 0.1%
A5h 1
Yes 0 ÷ 3
“ AL ” parameter in “ OUtP ” menu (active current output value on
critical exception): 0 - no change; 1 - 22.1 mA; 2 - 3.4 mA; 3 - 0 mA
Yes 0 ÷ 2 “ AL ” parameter in “ OUtP ” menu (passive current output value on
critical exception): 0 - no change; 1 - 22.1 mA; 2 - 3.4 mA
50