Simex SRT-94, User Manual

Page: 39 / 48

User manual - METER SRT-94
Register Write Range Register description
51h Yes 0 ÷ 9999
“ PEA ” parameter in “ HOLd ” menu (minimum detectable change, no
decimal point included)
52h Yes 0 ÷ 199
“ timE ” parameter in “ HOLd ” menu, maximum peaks' (or drops')
display time expressed in seconds
53h Yes 0 ÷ 1
“ HdiS ” parameter in “ HOLd ” menu:
0 - “ rEAL ” mode ; 1 - “ HOLd ” mode
54h Yes 0 ÷ 1
“ H r1 ” parameter in “ HOLd ” menu :
0 - “ rEAL ” mode ; 1 - “ HOLd ” mode
55h Yes 0 ÷ 1
“ H r2 ” parameter in “ HOLd ” menu:
0 - “ rEAL ” mode ; 1 - “ HOLd ” mode
56h Yes 0 ÷ 1
“ H r3 ” parameter in “ HOLd ” menu:
0 - “ rEAL ” mode ; 1 - “ HOLd ” mode
57h Yes 0 ÷ 1
“ H r4 ” parameter in “ HOLd ” menu:
0
- “
rEAL
” mode ;
1
- “
HOLd
” mode
58h Yes 0 ÷ 1
“ HOUt ” parameter in “ HOLd ” menu:
0 - “ rEAL ” mode ; 1 - “ HOLd ” mode
A0h
1
Yes 0 ÷ 3
“ Omod ” parameter in “ OUtP ” menu (active current output mode)
0 - current output disabled ; 1 - current output enabled with 4 ÷ 20mA
mode; 2 - current output enabled with 0÷20mA mode ;
3 - current output controlled via RS-485 interface
Yes 0 ÷ 2
“ Omod ” parameter in “ OUtP ” menu (passive current output mode)
0 - current output disabled ; 1 - current output enabled with 4 ÷ 20mA
mode; 2 - current output controlled via RS-485 interface
Yes 0 ÷ 5
“ Omod ” parameter in “ OUtP ” menu (active voltege output mode)
0 - voltage output disabled ; 1 - voltage output enabled with 0 ÷5V
mode; 2 - voltage output enabled with 1÷5V mode ; 3 - voltage
output enabled with 0÷10V mode ; 4 - voltage output enabled with
2÷10V mode ; 5 - voltage output controlled via RS-485 interface
A1h 1 Yes -999 ÷ 9999 “ OUtL
” parameter in “
OUtP
” menu, no decimal point included
A2h 1 Yes -999 ÷ 9999 “ OUtH ” parameter in “ OUtP ” menu, no decimal point included
A3h 1
Yes 0 ÷ 999
“ Lo r ” parameter in “ OUtP ” menu, for active current output and
active voltage output, expressed in 0.1%
Yes 0 ÷ 299
“ Lo r ” parameter in “ OUtP ” menu for passive current output,
expressed in 0.1%
A4h 1
Yes 0 ÷ 199
“ Hi r ” parameter in “ OUtP ” menu for active and passive current
output, expressed in 0.1%
Yes 0 ÷ 99
“ Hi r ” parameter in “ OUtP ” menu for active voltage output,
expressed in 0.1%
A5h 1
Yes 0 ÷ 3
“ AL ” parameter in “ OUtP ” menu (active current output value on
critical exception):
0
- no change;
1
- 22.1 mA;
2
- 3.4 mA;
3
- 0 mA
Yes 0 ÷ 2 “ AL ” parameter in “ OUtP ” menu (passive current output value on
critical exception): 0 - no change; 1 - 22.1 mA; 2 - 3.4 mA
39