Simex MultiCon CMC-N16, User Manual

Page: 32 / 292

User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-N16
Fig. 6.6. Main window of the device – displaying the Navigation bar
This bar contains three kinds of buttons shown in Tab. 6.1 .
switching between visualisation modes of a current group (for
possible modes see
Chapter 6.3.3. Data panels and Chapter
7.14. GROUPS
)
entering the main menu (see details in Chapter
7. CONFIGURATION OF THE MultiCon CMC-N16 )
switching between presented groups of logical channels
(activation and settings for
Group view see Chapter 7.14.
GROUPS )
Tab. 6.1 Buttons of the navigation bar
To enter the configuration menu of a particular Logical channel directly, press and
hold the screen over the channel data panel for 3-4 seconds (see option (1) in
Fig. 6.7 entering configuration of the logical channel named 'Temperature' ).
Similarly, to go directly to the configuration of a displayed
Group
, touch and hold
the group number
or
group name
in the upper
Information bar
for a few
seconds (see option (2) in Fig. 6.7 entering configuration of the Group named
'Group 4' ). In both cases if a password is set (see Chapter 7.17. ACCESS
OPTIONS ) then the user has to enter the password before entering the
configuration.
32
i