Simex multicon cmc-141, User Manual

Page: 72 / 300

User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
Example:
Steps to create a user characteristic consisting of 6 points (like on
Fig. 7.34 ):
1. Press the button next to the Scaling label and select user characteristic option
(point (1) and (2) in Fig. 7.35 ).
2.
Press the
Configure scaling
button and enter the
Scaling configuration
menu
(point
(3)
in
Fig. 7.35
).
3.
If you want to create an output
Unit
, which replaces the input unit, or if no unit is
defined on the input, press the button next to Output Unit label.
4. Press the Edit points button (point (4) in Fig. 7.35 ) and go to Edit points menu.
Fig. 7.35. Configuring the user characteristic
For
Point 1
set input and output value (point
(5)
in
Fig. 7.35
).
5.
Switch to
Point 2
by using the arrow keys and there also set the value of input and
output (point (6) in Fig. 7.35 ).
6. To add or delete points the user should use the Add point button or Delete point
button, respectively,
72
1
2
3
4
5
6
7
8
9