Simex multicon cmc-141, User Manual

Page: 38 / 300

User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
• yellow color – It is possible to log data in the device but there is less than 20%
of total free memory remaining (to clear the memory you need to move onto a
removable flash drive any important data logging files and possibly the Modbus
templates, after which remove them from the device - more information see
Chapter 7.3. FILES MANAGEMENT ). Also at the moment when free memory
drops bellow 20% a warning will be displayed on the screen.
•
red color
- warning about the lack of space on memory card, meaning data
logging would not be possible until space is freed in the memory (how to remove
data and exchange data with a flash drive is shown in
Chapter 7.3. FILES
MANAGEMENT )
• alternately blinking green with a blue color - when the indicator flashes blue
the logged data is moved to memory (Note! at this time you must not turn off the
device because it may cause a loss of recently logging data).
In order to turn off the device especially when the data logging is ON it is
recommended to use the safe-off device by pressing the button
Safe-shutdown
in
the main menu (see
Fig. 7.14
).
6.3.2. Navigation bar
The touching the screen at any place causes the Navigation bar to display
(see
Fig. 6.3
) which allows the user to switch between visualisation modes, groups and to
enter the menu.
Fig. 6.3. Main window of device – displaying the Navigation bar
This bar contains three kinds of buttons shown in
Tab. 6.1
.
switching between visualisation modes of current group (for
possible modes see
Chapter 6.3.3. Data panels and Chapter
7.14. GROUPS
)
entering the main menu (see details in Chapter
7. CONFIGURATION OF THE MultiCon CMC-99/141 )
switching between presented groups of logical channels
(activation and settings for
Group view see Chapter 7.14.
GROUPS )
Tab. 6.1 Buttons of the navigation bar
38
!