20
General warnings
The electrical equipment at end of life should be treated as waste electrical and
•
electronic equipment (WEEE)
Dispose of the substation at the end of life correctly according to directives and
•
local and national regulations.
Do not touch the substation when it is ON.
•
Do not touch the substation with wet hands.
•
Do not touch the substation with barefoot.
•
Do not remove or bypass safety devices or destroy the whole system.
•
Do not use water jets direct or indirect substation.
•
Do not open the door of the substation when it is powered.
•
The manufacturer is not liable for damage caused to the entire substation for pur-
•
poses other than those described in this manual.
The manufacturer is not liable for failure or forced rimorzione symbols and requi-
•
rements present in the system components.
Obey all local laws regarding safety and risk prevention.
•
Safe handlings
The manufacturer is not liable for damage caused to the entire substation for pur-
•
poses other than those described in this manual
The temperature and pressure of the water district heating system are very high.
•
Only qualifi ed technicians are authorized to perform the installation, initial start-
up and maintenance of substation
The manufacturer is not liable for the failure or forced rimorzione symbols and
•
requirements present in the system components
Obey all local laws regarding safety and risk prevention
•
This Substation may require 2 or more operatives to move it into its installation site,
•
remove it from its packaging and during movement into its installation location. Ma-
noeuvring the boiler may include the use of a sack truck and involve lifting pushing
and pulling.
Remove the package at the installation site
•
Caution should be exercised during these operations
•
During all manoeuvres and handling actions, every attempt should be made to ensure the
following unless unavoidable and/or the weight is light. Operatives should be knowledge-
able in handling techniques when performing these tasks and the following precautions
should be considered:
Grip the boiler at the base
•
Be physically capable
•
Use personal protective equipment as appropriate e.g. gloves, safety footwear
•
Avoid direct contact with sharp edges
•
Avoid contact with any hot surfaces
•
Keep back straight
•
Avoid twisting at the waist
•
Always grip with the palm of the hand
•
Keep load as close to the body as possible
•
Always use assistance
•
Please be aware that due to the wet testing of the appliance, there may some r sidual
•
water in the hydraulic circuit.
Protect any surfaces, carpets or fl oorings.
•
Use a suitable container to catch any water that escape when removing the protective
•
caps from the connections.
SAFETY INFORMATION
