Simplify Communication
SIM7060 Series_GNSS_Application Note
Page
5
/
11
AT+CGNSRST
GNSS Reset Mode
AT+CGNSTST
Send data received from GNSS to AT UART
3.1
AT+CGNSPWR GNSS Power Control
3.2
AT+CGNSINF GNSS Navigation Information Parsed
from NMEA Sentences
AT+CGNSINF GNSS Navigation Information Parsed from NMEA Sentences
Execution
Command
AT+CGNSINF
Response
+CGNSINF: <GNSS run status>,<Fix
status
>,<UTC date &
Time>,<Latitude>,<Longitude>,<MSL Altitude>,<Speed Over
Ground>,<Course Over Ground>,<Fix
Mode>,<Reserved1>,<HDOP>,<PDOP>,<VDOP>,<Reserved2>,<GNSS
AT+CGNSPWR GNSS Power Control
Test Command
AT+CGNSPWR=?
Response
+CGNSPWR: (
list of supported
<mode>
s
)
OK
Parameters
See Write Command
Read Command
AT+CGNSPWR?
Response
TA returns the current status of GNSS Power supply
+CGNSPWR: <mode>
OK
Parameters
See Write Command
Write Command
AT+CGNSPWR=<m
ode>
Response
OK
or
ERROR
Parameters
<mode>
0 Turn off GNSS power supply
1 Turn on GNSS power supply
Reference
SIMCom
Confidential
File
