SIM548C Hardware Design
The GSM part of the module provides two unbalanced asynchronous serial ports. One is the serial
port and another is the debug port. The GSM part is designed as a DCE (Data Communication
Equipment), following the traditional DCE-DTE (Data Terminal Equipment) connection.The
module and the client (DTE) are connected through the following signal (as following figure
shows). Autobauding supports baud rate from 4800bps to 115200bps.
Serial port
z
TXD: Send data to the RXD signal line of the DTE
z
RXD: Receive data from the TXD signal line of the DTE
Debug port
z
DBG_TXD: Send data to the /RXD signal line of the DTE
z
DBG_RXD: Receive data from the /TXD signal line of the DTE
The logic levels are described in following table
Table 14: Logic levels of serial ports pins
Parameter
Min
Max
Unit
V
IL
0
0.9
V
V
IH
2.1
3.3
V
V
OL
GND
0.2
V
V
OH
2.8
3
V
SIM548C_HD_V1.01
09.05.2008
45
