SIM5350 AT Command Set
YES
V.25ter
Syntax
Execution Command
Responses
TA/DCE switches to Data Mode from Command Mode:
CONNECT [
<baud rate>
]
ATO
If connection is not successfully resumed or there is not a
connected CSD call:
NO CARRIER
Defined values
<baud rate>
28800 Connected with data bit rate of 28800 bits/s (HSCSD)
19200 Connected with data bit rate of 19200 bits/s (HSCSD)
14400 Connected with data bit rate of 14400 bits/s (HSCSD)
9600 Connected with data bit rate of 9600 bits/s
4800 Connected with data bit rate of 4800 bits/s
2400 Connected with data bit rate of 2400 bits/s
Examples
ATO
CONNECT 115200
3.8
ATP Select Pulse Dialling
Description
Select pulse dialing. (This setting is ignored.)
3.9
ATS0 Set Number of Rings before Automatically Answering the
Call
Description
The S-parameter command controls the automatic answering feature of the Module. If set to 000,
automatic answering is disabled, otherwise it causes the Module to answer when the incoming call
indication (RING) has occurred the number of times indicated by the specified value; and the
setting will not be stored upon power-off, i.e. the default value will be restored after restart.
SIM5350_ATC_V1.02
6/9/2014
17
